It is a device for measuring soil moisture in a pot. The device measures humidity in the range of 0 to 100%. The device also measures the ambient temperature in the range of -25 to + 60 ° C. The device is powered by three AAA batteries, which are able to power the device for more than 6 months. The endurance of the device depends on the measurement interval. The device works in such a way that it performs measurements at a specified interval and then goes into sleep mode for a defined time, in which it significantly saves energy consumption. The interval can be changed by the user in the range from 10 minutes to 71 minutes.
All data is then available via WiFi 802.11 b / g / n. The device contains a built-in web server, so it is possible to view the measured data by direct access to the IP address of the device. The device also allows you to send data to a cloud system MARS, which can be accessed from anywhere via the Internet. This functionality is also supported by a specially developed Android application for mobile phone and tablets.
The device can be easily configured via the internal web interface. It is easy to set parameters for WiFi connection, adjust the offset of measured quantities, which is advantageous in cases where the device is operated near a heat source that constantly affects its measured quantities. If the device is not connected to a WiFi network, it automatically creates a Hotspot, which can be easily connected via a mobile phone, tablet or computer. The basic measured data, ie temperature, humidity and atmospheric pressure, are further supplemented by a sophisticated calculation algorithm, and therefore the device provides computed data on the sensory temperature, dew point temperature or approximate altitude.
The device is fully compatible with other Home Technologies devices. It includes a special algorithm that can automatically detect other compatible devices on the network and pair these devices using user-configurable events. For example, it is possible to set an event where, when the temperature defined by you is exceeded, the relay on the relay module is switched on and the fan is started. Device configuration is very easy, fast and intuitive.
The body of the device is made with the latest 3D printing technologies.
The device is designed for operation in buildings, apartments, offices, halls and other indoor spaces.
It is a practical sensor for soil moisture sensor.
Any number of sensors can be placed in the home network up to the full occupancy of IP addresses.
In combination with our application or web interface, you can get an aesthetic overview of temperatures, humidity and pressure from individual sensors. You can choose either each sensor in one frame or several trends in one graph.
The device was developed and is manufactured in the Czech Republic by Czech developers.
Device is fully compatible with MARS cloud system, to which it enables sending measured data and access them from anywhere in the world. In MARS you can view retrieved data organized in own dashboard in form of digit or chart. Functionality of MARS is supported by two applications for Android devices, which serves for easy access to system, adding of new device or setup and displaying of phone notifications.
MQTT & Home Assistant
Each device in the Home Technologies family includes a built-in ability to connect to any MQTT server to display data, as well as control the device if it is an actuator. Our devices can easily connect, for example, with the popular Home Automation system Home Assistant, where communication takes place using the aforementioned MQTT protocol. For your convenience, we have prepared instructions for you on how to set everything easily. Instructions can be downloaded HERE.
This is under preparation